Price: $464.00


Cycletrol® C2000 DC Adjustable Speed Controllers

Product Details

Graham's Motors and Controls Cycletrol® Series DC adjustable speed controls provide rapid cycling capabilities, while offering higher reliability and lower maintenance compared to clutch/brake mechanisms. The Cycletrol Series consists of two product lines, the 150 Series rated for up to 60 cycles/minute and the C2000 rated for up to 30 cycles/minute.

Common Features:
  • All Cycletrol digital logic inputs are optically isolated
  • Versatile logic allows direct interfacing with switches and push-buttons or solid state devices
  • LED function lights are easy-to-see indicators of control status
  • Transient protection by voltage clamping MOV's and RC networks protect power components against power spikes
  • Torque limiting by the Cycletrol's adjustable current limit provides motor and drive train protection in the event of machine overloads or jams
  • Heavy-duty aluminum chassis or NEMA 12 enclosures

    • The Cycltrol C200 Serie DC drive provides rapid cycling up to 30 cpm. The C200 serves as an accurate speed and cycling conotrol and is coverred by our two-year warranty.

      • - Econimical alternative for lighter duty cycling applications
      • Wide speed range with full torque available sodwn to 60 rpm

Chassis Versions

Chassis - 120V 1Ø
Up to 1/2 HP
Chassis- 240V 1Ø
-

NEMA 12 Versions

NEMA 12 -120V 1Ø
-
NEMA 12- 240V 1Ø
-

Specification

SpecificationValue
Horsepower1/8 - 1 hp (120 VAC), 1/8 - 1 hp (240 VAC)
Line Voltage120 V, 240 V
Frequency50/60 Hz
Phase Single
Maximum Duty Cycle30 cycles/minute continuous with typical 1 HP motor. Total reflected inertia not to exceed 20% of armature inertia.
Output - Armature Voltage0 to 90 VDC (120 VAC), 0 to 180 VDC (240 VAC)
ConfigurationsChassis, NEMA 12
Speed Range (Armature Feedback)30:1 full torque
Speed Regulation (Armature Feedback)< 5% of base speed (for 95% lad change)
Speed Regulation (Tachometer Feedback)< 5% of base speed (for 95% lad change)
Speed Variation (Due to Line Voltage Fluctuation)<1% armature voltage change within input power range
Speed Variation (Due to Thermal Drift)<2% for control; motor depends on application
Ambient Temperature 32 to 104 ºF; 0 to 40 ºC (NEMA 12), 32 to 131 ºF; 0 to 55 ºC (chassis)
Control Adjustments (Minimum Speed)Fixed at zero
Control Adjustments (Maximum Speed)50 to 115% of motor base speed
Control Adjustments (Acceleration)Fixed at 0.2 seconds
Control Adjustments (Current Limit)10 to 150% control rating
Inputs (Logic Input)Start, Stop, Jog, Reset, Override Stop
Inputs (Analog Speed Inputs)5K ohm, 1 watt, potentiometer supplied with controls in an enclosure only. Isolated process signal of 0-10 VDC, 4-20 mA may be used.
LED IndicatorsPower

Price: $464.00