Price: $142.00


Vari Speed® S1000 High-Performance DC Motor Speed Controllers

Product Details

The Vari Speed® S1000 is a high-performance DC motor speed control designed for maximum reliability in 1/20 to 2 HP applications. The surface mount technology incorporated into the design reduces package size and improves reliability... creating a savings in both cost and space for you.

Options
Plug-on Terminal:
The plug-on terminal board provides easy wiring for standard 14-20 AWG wire.

Refer to drawing for proper terminal wiring.
Note:Wiring to terminal board before installation to Vari Speed S1000 may simplify procedure.
Terminal board part numbers:
  • 176B1113, 120 VAC, 45 Deg. Terminal Block
  • 176B1114, 240 VAC, 45 Deg. Terminal Block
Potentiometer Kit: 176B1121
  • Includes a 5 K ohm, 1W pot, and mounting hardware.
Current Sensor Resistor:
  • Plug-on design allows for easy field modification
  • Refer to ratings chart for correct part number

Specifications

Horsepower
1/8, 1/4, 1/2, 3/4, 1
Voltage
120 V
Phase
Frequency
50/60 Hz
Armature Voltage (DC)
0 to 90 V
Armature Current
2.4 A, 4.0 A, 6.8 A, 9.6 A, 12.2 A
Current Sense Resistors
176B1115, 176B1116, 176B1117, 176B1118, 176B1119, 176B1120
Heat Sink Option
176B1122
Terminal Board Option
176B1113

Options

Current Sensor Resistor:
  • Plug-on design allows for easy field modification
  • Refer to ratings chart for correct part number

Heatsink: 176B1122
For use in higher horsepower applications.

Plug-on Terminal:
The plug-on terminal board provides easy wiring for standard 14-20 AWG wire.

Refer to drawing for proper terminal wiring. Note: Wiring to terminal board before installation to Vari Speed S1000 may simplify procedure.

Terminal board part numbers:
  • 176B1113,120 VAC, 45 Deg. Terminal Block
  • 176B1114, 240 VAC, 45 Deg. Terminal Block

Potentiometer Kit: 176B1121
Includes a 5 K ohm, 1W pot, and mounting hardware.

Control Specifications

Service Factor
1.0
Duty
Continuous
Overload Capability
150% for one minute
Speed Regulation
  • ±2% of base speed (for 95% load change)
  • ±1% of base speed due to line voltage fluctuation
Speed Range
50:1 at full torque
Speed Input
  • 5K ohm potentiometer 1 watt
  • 0-5 or 0-10 VDC process signal, (must be isolated)
Adjustments
  • Minimum speed (0-50% motor base speed)
  • Maximum speed (50-110% motor base speed)
  • Current (torque) limit (10-150% control rating)
  • IR compensation (0-25% rated output)
  • Acceleration (0.5-15 sec.)
  • Deceleration (0.5-15 sec.)
AC Line Voltage Variation
Rated voltage (±10%)
AC Line Frequency
48 to 62 Hz
Ambient Temperature
  • 0 to 55 ºC
  • 32 to 131 ºF
Elevation
Up to 3300 ft. with derating

Feature/Benefit

Design FeaturesCustomer Benefits
Surface mount technology reduces size and improves reliabilityLess costly enclosures and increased uptime
Current limit and run LED indicatorsReduced set-up time and decreased downtime
Unique circuitry virtually eliminates temperature and voltage driftPrecise control
Horsepower selectable via plug-in resistor permits component standardizationReduced inventory
User-selectable inhibit control for operation with open or closed contactAllows logic flexibility and convenience
Run/Stop logic control circuitryEliminates need for costly power switching components
Exclusive two-year replacement warrantyNo service hassles
UR/cUR recognized

Price: $142.00